• Welcome to Maher's Digital World.

Windows XP Support

Started by Maher, June 21, 2011, 11:56 PM

Previous topic - Next topic

Maher

Quote from: kevsterx on August 06, 2011, 09:35 AM
Quote from: Maher on August 04, 2011, 09:55 PM
Quote from: kevsterx on August 04, 2011, 05:27 AM
in my old pc got error:
*** STOP: 0X000000713 (0XF7CAE524, 0XC0000034, 0X00000000, 0X00000000)??

but works perfect in laptop and other pc
I think the problem is with your CD/DVD ROM.
may be, but no problem when i use my old non integrated installation cd Xp sp3. my old pc HD is IDE. my DVD rom is SATA.

by d way forgot to say thanks for Windows XP july 2011. :-)
You're welcome.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

Maher

Quote from: densw on August 06, 2011, 10:25 AM
Inside 'SATA Operation Mode' is no option like Compatible is only IDE or RAID,and y disabling OnBoard SATA Controller; but error persist''setup did not find any hard disk drives''.I don't know why and what that happens :o :-XThanks for help Maher!
You need to download your HDD SATA drivers from the manufacturers website and copy them into a USB flash and point to it when asked during setup.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

Maher

Quote from: qwerty on August 06, 2011, 04:29 PM
I have Linux Ubuntu on my HTPC but got tierd of fixing stuff all the time so i downloaded your torrent.
Question though: Can i burn the .zip directly on a CD? How do i do that without messing up?
This is not a ZIP file, but it looks like it. It's actually an ISO file.
Search Google: How to burn an ISO file into a CD.
Good luck.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

qwerty

Quote from: Maher on August 06, 2011, 08:15 PM
Quote from: qwerty on August 06, 2011, 04:29 PM
I have Linux Ubuntu on my HTPC but got tierd of fixing stuff all the time so i downloaded your torrent.
Question though: Can i burn the .zip directly on a CD? How do i do that without messing up?
This is not a ZIP file, but it looks like it. It's actually an ISO file.
Search Google: How to burn an ISO file into a CD.
Good luck.

I burned the files on a USB and installed the first part. Now it says "Windows could not start beacuse this file is missing or is corrupt:
<Windows root>\system32\hal.dll
Please re-install the copy of the above"


What do i do?

Maher

Quote from: qwerty on August 06, 2011, 09:02 PM
Quote from: Maher on August 06, 2011, 08:15 PM
Quote from: qwerty on August 06, 2011, 04:29 PM
I have Linux Ubuntu on my HTPC but got tierd of fixing stuff all the time so i downloaded your torrent.
Question though: Can i burn the .zip directly on a CD? How do i do that without messing up?
This is not a ZIP file, but it looks like it. It's actually an ISO file.
Search Google: How to burn an ISO file into a CD.
Good luck.

I burned the files on a USB and installed the first part. Now it says "Windows could not start beacuse this file is missing or is corrupt:
<Windows root>\system32\hal.dll
Please re-install the copy of the above"

What do i do?
Try burning the CD again with minimal speed.
Good luck.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

Zahiri

#135
Hi Maherz thank you very much for this torrent. I haven't yet installed on my laptop.
I got Toshiba laptop with vista and thinking to go for XP.  I understood that the setting in the bios must be changed, right?
Where can I find the AHCI or IDE mode in the Bios because I can't find it and what must I change?
Why must I burn it slow actually?

ORIAX

Clear your DLLCACHE (to do that, go Start > RUN... in there you type DLLCACHE... and delete all of the files in there... that should do the trick... it's done the same for me).

Maher

Quote from: Zahiri on August 07, 2011, 11:32 AM
Hi Maherz thank you very much for this torrent. I haven't yet installed on my laptop.
I got Toshiba laptop with vista and thinking to go for XP.  I understood that the setting in the bios must be changed, right?
Where can I find the AHCI or IDE mode in the Bios because I can't find it and what must I change?
Why must I burn it slow actually?
Don't change anything now. Try installing without changing anything, it will propably work.
Burning at slow speed will guarantee you no mistaked during burning.
Good luck.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

Maher

Quote from: ORIAX on August 07, 2011, 02:34 PM
Clear your DLLCACHE (to do that, go Start > RUN... in there you type DLLCACHE... and delete all of the files in there... that should do the trick... it's done the same for me).
What are you talking about?  :o
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

Zahiri

#139
Thank you very much for your reply :)
I have tried to burn the xp image on a new cd rw but after finishing burning proces the cd rw is still empty and it doesn't saved any data on the disc.
Is it only possible in a CD r ? I  burned the image several times with nero and poweriso, 4 speed, but same problem. I don't understand it ???.


Is it possible to make a bootable usp with the xp image I download?
And what kind tool or programs are working to make a xp bootable usp ?

Thanxx