• Welcome to Maher's Digital World.

Windows XP Support

Started by Maher, June 21, 2011, 11:56 PM

Previous topic - Next topic

jc_ram

 :-[
hi  sir..
i installed your Windows XP SP3 Sept release
after installing it
2 missing drivers
ethernet and multimedia audio controller
i found the ethernet  and installed succesfully
but when i installed sound driver which is Realtek AC'97 that supposed to be the sound driver for my board ..it automatically booting my pc when AC'97 almost finishing installed..
after hours and hours
i try different methods

i boot up with safemode and installed AC'97 ..and i installed it..
afterwards i boot up normally
and ITS JUST BOOTING AND AGAIN AND AGAIN

i went to safe mode and uninstalled it..

i dont have any sounds   :-[


my board is
SpringDale-G i865g

Maher

Quote from: pumatronic on October 25, 2011, 04:39 PM
Hi there. Thanks for replying.

I don't have these options.. I've seen them on the net being proposed, but i just don't have these options.

All i can set in BIOS regarding SATA is the following:

SATA CONTROLLER (disable, enable)- i have it set to enabled
SATA MODE ( ide, raid)- i have it set to ide

Have you got any other ideas, what can be done in my case ?

On some other site i was said to run a diagnostics for my HDD to check for errors...I'll try that and will return with updates..

Thanks.
Sorry to tell you, but I ran out of ideas!
Don't think it's a hard disk problem, it's just that the drivers are missing!
Try getting the drivers from another site.
Good luck.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

Maher

Quote from: jc_ram on October 25, 2011, 04:58 PM
:-[
hi  sir..
i installed your Windows XP SP3 Sept release
after installing it
2 missing drivers
ethernet and multimedia audio controller
i found the ethernet  and installed succesfully
but when i installed sound driver which is Realtek AC'97 that supposed to be the sound driver for my board ..it automatically booting my pc when AC'97 almost finishing installed..
after hours and hours
i try different methods

i boot up with safemode and installed AC'97 ..and i installed it..
afterwards i boot up normally
and ITS JUST BOOTING AND AGAIN AND AGAIN

i went to safe mode and uninstalled it..

i dont have any sounds   :-[


my board is
SpringDale-G i865g
Use Driver Pack Solution.
You can get it from here: http://drp.su
Good luck.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

funkeeg

Hi,
It won't start up because it says it's corrupt.
What can I do?
Thanks

Maher

Quote from: funkeeg on October 26, 2011, 11:32 AM
Hi,
It won't start up because it says it's corrupt.
What can I do?
Thanks
Burn the ISO again on another CD with minimal burning speed.
Good luck.
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

anakangtokwa

#515
Mr. Maher im sorry but im' a total noob . . i dont know where to find the product key?? where it is?? please IVE DOWNLOADED Microsoft.Windows.XP.Professional.SP3.Integrated.September.2011.SATA.By.Maher.[www.nomaher.com]

KeepItReal

salamalaykoem maher:P

Hello,

I had a question. I downloaded your file Microsoft.Windows.XP.Professional.SP3.Integrated.July.2011.SATA.By.Maher.[www.nomaher.com]
and my question was, can I just burn it? No mounting stuff with daemon tools or something? And can I just download the updates after the xp is installed?(automatically updates on)

Thanks for your file, I really appreciate it and I would appreciate it more if some one/or you would answer my questions.


Maher

Quote from: KeepItReal on October 27, 2011, 06:27 PM
salamalaykoem maher:P

Hello,

I had a question. I downloaded your file Microsoft.Windows.XP.Professional.SP3.Integrated.July.2011.SATA.By.Maher.[www.nomaher.com]
and my question was, can I just burn it? No mounting stuff with daemon tools or something? And can I just download the updates after the xp is installed?(automatically updates on)

Thanks for your file, I really appreciate it and I would appreciate it more if some one/or you would answer my questions.
You're welcome.
Your questions were already answered.
Thanks goes to Tovagulet from Chile ;)
Please, DO NOT send messages for support! Ask on the forums. Thank you.

http://maherz.softarchive.net/

KeepItReal

#518
Hi, thanks guys for your fast responses..anyway..
I burned it 3 times lol but I didnt mount it or unmount it or something with daemon tools..just burned it..(image file is it right?not iso?otherwise it would say at the end '.iso', wouldnt it?

I dunno what I did exactly (it was a time ago) but I suppose that I've extracted the file with Winrar.

I meant Mount. Cant I just burn it with Nero startsmart essentials( I did already now 3 times, burned the XP 3 times:P)
But what I mean is do I have to Mount it with daemon tools? I guess no, cuz I dont need it to open it from my drive..but just boot it when i start the pc..
Thanks.

nexus

hi ive just tried your xp october release but it asks me for a serial when i try to install it any help pls